Accent Retail

Perforated Window Decals for Retail Storefronts Quebec

November 18, 2026

Perforated Window Decals for Retail Storefronts Quebec
Photo: Max Vakhtbovych / Pexels

Comparing perforated window decals for retail storefronts in Quebec

Perforated window decals should be selected according to brand visibility, image density, lighting, expected lifespan, installation conditions and municipal sign rules. For multi-location programs, the best specification is the one that produces consistent storefront graphics without sacrificing more interior visibility than each location can accept.

Perforated vinyl has a printable face with regularly spaced openings. Under suitable lighting, customers outside see the printed graphic more prominently, while staff and customers inside retain a partial see-through view.

The effect is commonly called one-way vision, but it is not guaranteed privacy. If the store interior is brighter than the street, people outside may see through the film more easily.

80/20 vs. 70/30 vs. 60/40 vs. 50/50 perforated film

A higher film-covered percentage generally creates a denser printed image, while a higher open percentage preserves more outward visibility. Choose 80/20 for graphic impact, 60/40 for a practical retail balance, and 50/50 when interior visibility is the main priority.

The first number usually represents the film-covered portion, and the second represents the nominal open area. Available commercial constructions include 80/20, 70/30, 60/40 and 50/50.

Film ratio Exterior image quality View from inside Relative material and production considerations Best use case
80/20 Strongest image density of these options Most restricted Dense ink coverage makes colour control and curing especially important Promotional windows where exterior impact matters most
70/30 Strong, detailed graphics Moderate Good compromise for photography, branding and readable offers Campaign windows and branded storefront zones
60/40 Balanced image and visibility Good Common starting point for occupied environments Multi-store programs, service counters and long-running campaigns
50/50 Lightest exterior image Best outward visibility Artwork may require stronger contrast and simpler detail Windows where staff need a clearer exterior view

The ratio alone does not determine actual visible-light transmission. One 50% open-area construction has a stated 37.5% visible-light transmission, which shows that hole geometry and film construction also affect the result (product technical data sheet).

Hole size matters as well. Smaller openings can help maintain image detail, while larger openings may provide a more open view from the interior. Buyers should ask for the exact product data sheet and a printed sample rather than approving a project from the ratio alone.

Perforated film vs. clear, opaque and frosted window graphics

Perforated vinyl is best when the glass must carry a substantial printed image while retaining some outward visibility. Clear, opaque and frosted films are better when transparency, maximum colour density or visual screening takes priority.

Window graphic option Print quality Interior visibility Privacy or screening Relative cost Choose it when
Perforated film Strong, but affected by openings Partial Lighting-dependent only Mid-range, varies by film and finishing A campaign needs image area without fully blocking the window
Clear film Best with selective graphics or white ink High in unprinted areas Low Varies with white ink and layers The design needs a printed-on-glass appearance
Opaque film Highest colour density None through covered areas High Often efficient for solid coverage The back of the graphic and outward view do not matter
Frosted film Better for patterns and restrained branding Diffused rather than clear Moderate to high screening Varies by coverage and cutting Offices, clinics, fitting areas or premium decorative applications
Static-cling material Suitable for shorter indoor applications Depends on design Limited Often economical for small campaigns Easy application and short-term indoor use matter more than outdoor durability

A perforated graphic may also moderate brightness and some sun glare because the covered portions block part of the incoming light. It should not be treated as a substitute for specified solar-control or UV-protection film, however, unless the manufacturer provides the relevant performance data.

Costs vary by job. The principal variables include film construction, total square footage, custom sizes, number of artwork versions, contour cutting, lamination, removal of existing graphics, access conditions, installation geography and the number of stores. A procurement team can use published graphics and signage pricing as a planning reference, but a rollout still requires a job-specific specification and estimate.

Choosing the right option by use case

For most occupied shops, 60/40 perforated film is a sensible starting point, not an automatic final choice. Move toward 70/30 or 80/20 when brand visibility and image strength dominate, or toward 50/50 when employees need better visibility to the exterior.

Choose 80/20 when exterior impact is the priority

This construction suits bold promotional graphics, launch campaigns and windows that function primarily as advertising space. It is less suitable where staff rely on the window for awareness of pedestrians, entrances or exterior activity.

Choose 70/30 for detailed campaign artwork

A 70/30 perforation ratio can support stronger photography and brand colour than more open alternatives while retaining partial outward visibility. It is a practical choice for feature windows that are not the store’s main source of daylight.

Choose 60/40 for multi-location programs

This ratio often provides a workable balance for campaigns that must perform across varied storefronts. Even so, lighting, glass dimensions and viewing distance should be checked at representative locations before the full run.

Accent Impression prints, kits and coordinates in-store and window graphics for multi-location retail rollouts across Canada from its Montreal production operation.

Choose 50/50 when the interior view matters most

A 50/50 construction preserves more outward visibility, but the exterior image will be less dense. Designs should use large type, strong contrast and simplified imagery rather than fine details or subtle tonal transitions.

Cost, quality and durability considerations

The lowest unit cost is not always the lowest program cost. Buyers should compare expected service life, removal requirements, installation conditions, colour consistency and the cost of correcting unsuitable files or location data.

Print technology should be part of that comparison. Eco-solvent printing is one possible production method for compatible perforated vinyl, but the approved combination of film, ink, printer profile and finishing process matters more than the ink category alone. Standard CMYK output also has a defined colour gamut, so critical brand colours may require profiling, physical proofs and agreed tolerances rather than approval from an uncalibrated screen.

Durability depends on the product, exposure and installation. Commercial specifications can range from shorter outdoor applications to products claiming several years under defined vertical-exposure conditions. A stated lifespan should therefore be read with its climate, orientation, cleaning and application assumptions.

Quebec conditions deserve particular attention. One commercial construction specifies installation between approximately +10°C and +30°C, service between approximately -17°C and +50°C, and removal at +10°C or above. Since winter temperatures can fall below a film’s stated service range, procurement documents should identify the installation season, exposure and exact approved product.

Surface preparation also affects quality. The glazing should be clean and dry, and some perforated films are non-repositionable. The installation plan should address old adhesive, silicone edges, window seals, pane damage and safe access before installers arrive.

A removable adhesive may simplify short campaigns, but “removable” does not mean residue-free under every condition or after an unlimited period. Adhesion can increase over time, particularly with prolonged exposure.

Planning a multi-store graphics rollout

A reliable rollout starts with verified site data and a controlled specification. The buyer should approve dimensions, artwork versions, film construction, colour targets, packing rules and installation responsibility before production begins.

1. Build a location survey

Record each store number, civic address, borough or municipality, pane dimensions, window orientation, interior lighting, access restrictions and existing graphics. Photographs should show the entire elevation as well as mullions, door hardware and individual panes.

Custom sizes should be based on verified pane measurements rather than assumed architectural dimensions. Large designs may also require separate panels, so the survey should identify acceptable seam locations and any obstructions that affect trimming.

2. Separate artwork from location data

Create a version matrix connecting every language, offer, store format and graphic size to the correct destination. Programs may require Quebec French creative, while stores elsewhere in Canada may use English or bilingual versions.

3. Approve representative proofs and samples

Review colour proofs for image and brand content, then test the actual perforated material where practical. Assess the sample from the exterior at the intended distance and from inside under daytime and evening lighting. This check helps evaluate both image density and the lighting-dependent one-way vision effect.

4. Define production and finishing controls

The specification should identify the approved film, ratio, adhesive, print method, CMYK profile or colour target, lamination decision, panel overlap and trimming method. For broader programs that include window graphics, floor decals, shelf communication and POP displays, a consolidated graphics and signage specification helps maintain consistency.

5. Kit by store

Each kit should carry a store identifier and contain only that location’s approved pieces. Packing lists, pane maps and installation drawings reduce sorting errors at the store level.

6. Maintain change control

Late offer changes, closures and revised opening dates should pass through one approved change log. A controlled hold-and-release process is safer than allowing individual locations to modify artwork independently.

Buyers developing specifications can also consult more graphics and signage guides when comparing substrates, finishing methods and rollout requirements.

Quebec permits, window coverage and safety

Window graphics must be reviewed against the rules of the municipality and, where applicable, the borough. In Montreal, guidance states that installing, replacing or changing a commercial sign requires a permit, including signs placed on windows and exterior doors.

Montreal guidance also cites a limit of 30% of the opening for a sign placed on that opening. A perforated construction should not be assumed to avoid this limit simply because it contains holes.

Before production, confirm:

  • The municipality and borough responsible for the property
  • The zoning category and permitted sign types
  • Maximum window or opening coverage
  • Permit and drawing requirements
  • Heritage or architectural restrictions
  • Landlord and property-manager approvals
  • Rules affecting doors, exits and sightlines

Requirements are not uniform across the province. A design acceptable in one municipality may need different dimensions or placement in another.

Decorative film is also separate from safety glazing. Canada’s 2026 safety-glazing standard addresses glazing materials used in human-impact areas and their performance when fractured (Government of Canada, 2026). Applying a perforated decal does not establish that a door, sidelite or low glass pane meets the applicable safety-glazing requirement.

Frequently asked questions

Are perforated window decals completely private?

No. Their one-way vision effect depends on relative lighting. A bright exterior and darker interior favour the printed image, while strong interior lighting can make the store more visible from outside.

Can perforated film cover an entire Montreal storefront window?

Do not assume it can. Montreal guidance limits signs on openings to 30% of the opening, and the applicable borough may require a permit or regulatory review. Confirm the current rules before final artwork and production.

Is 50/50 film always the best choice for visibility?

It generally provides more open area than 60/40, 70/30 or 80/20 film, but nominal open area is not the same as visible-light transmission. Review the product data sheet and test a sample under actual lighting.

Should perforated decals be laminated?

It depends on the film, ink system, exposure, expected lifespan and cleaning conditions. Lamination may affect optical performance and must be compatible with the perforated construction, so the complete print system should be specified together.

Can perforated film be installed during winter?

Only when temperature and surface conditions fall within the selected product’s specifications. Cold glass, moisture and outdoor temperatures may require rescheduling, temporary environmental control or a different installation plan.

What should procurement include in the request for quotation?

Include pane dimensions, quantities by size, artwork versions, preferred film ratio, campaign duration, installation locations, removal requirements, delivery or kitting instructions, permit responsibility and target installation window. Ask bidders to identify assumptions, production method and the exact material proposed.

Request a program quote

Running a program across many locations, or a large offset or wide-format run? Send us the specs and our Montreal team will quote the whole program.

Request a program quote

Have a project like this?

  • Printer-direct pricing
  • Reply in 1 business day
  • Made in Montréal

We'll respond within one business day. No automated drip emails.

All posts